Blogs > Nileyears > My Blog |
Time to Retire Old Joe This post is only viewable by YoungAtHeart members. Join YoungAtHeart now! |
|||
|
Might be a good time to look into that 12 string guitar I've had my eye on.
| ||
|
I decided I needed a new acoustic guitar last year. Got a Taylor Academy 10e ... it didn't break the bank and I love it.
| ||
|
That can be repaired. There's a couple of ways; The expensive way that would mean taking the bridge off and either putting another one on or repairing the old one and putting it back. You've already researched that. 2. Depending if it's only the bridge that is split or whether behind it is split as well there's the possibility of using an epoxy resin or a suitable glue to run into the split, letting it set and seeing what happens. If the split goes right through the guitar, you'll have to stick something behind to stop the glue leaking out. The glue will fill up the peg holes so I'd suggest making little wooden plugs to seal up the holes, they will be glued in after the process but will be easier to drill and file out being wood. This would require a bit of care in doing , it depends if you'd want to put in the effort or could find someone with a little bit of skill to do it for you. If you run a suitable epoxy or glue though you are committed to the result you get. You can get colours for epoxy if you want to match it but a clear would do. A problem might be quantities, not sure if you can get just a tiny amount. Something to think about. God bless Judgment Day will be interesting - and all paths lead there.
| ||
|
I decided I needed a new acoustic guitar last year. Got a Taylor Academy 10e ... it didn't break the bank and I love it. I tried a Takamine 12 string out and loved it! It was also an acoustic/electric.
| ||
|
That can be repaired. There's a couple of ways; The expensive way that would mean taking the bridge off and either putting another one on or repairing the old one and putting it back. You've already researched that. 2. Depending if it's only the bridge that is split or whether behind it is split as well there's the possibility of using an epoxy resin or a suitable glue to run into the split, letting it set and seeing what happens. If the split goes right through the guitar, you'll have to stick something behind to stop the glue leaking out. The glue will fill up the peg holes so I'd suggest making little wooden plugs to seal up the holes, they will be glued in after the process but will be easier to drill and file out being wood. This would require a bit of care in doing , it depends if you'd want to put in the effort or could find someone with a little bit of skill to do it for you. If you run a suitable epoxy or glue though you are committed to the result you get. You can get colours for epoxy if you want to match it but a clear would do. A problem might be quantities, not sure if you can get just a tiny amount. Something to think about. God bless I think there are epoxy glues you can buy in small tubes and mix when needed. I have a drill and drill bits, so don't need to buy any tools. I'm now trying to figure out how to make the plugs. I also noticed small cracks where the saddle sits, but that looks like an easy fix. Thank you for the help Hermit, always appreciated. God Bless you too!
| ||
|
While several "Old Joes" to be retired crossed my mind.... Yours is unique! I'd get the 12 string and give this Old Joe a special place on the wall =where you may gaze with fond memories. Yet while sounding "wonky" you still may want to pick him up from time to time just for memory sake.
| ||
|
While several "Old Joes" to be retired crossed my mind.... Yours is unique! I'd get the 12 string and give this Old Joe a special place on the wall =where you may gaze with fond memories. Yet while sounding "wonky" you still may want to pick him up from time to time just for memory sake. I almost changed my guitar's name because of an ex-boyfriend named Joe, but never did, my guitar was here long before we ever dated. I'm going to try and repair Old Joe per Hermit's idea and see how it goes. If it doesn't work out, it will be another work of art on my music wall under my "Rae's Place" sign that a friend carved out of wood for me. Fixed, or not fixed, I'm going to get that 12 string!
| ||
|
MY MARTIN CAME FROM CALIFORNIA EONS AGO AND IS STILL IN PRETTY GOOD CONDITION. I WONDER WHAT IT WOULD BE WORTH NOW?
| ||
|
You could make the wooden plugs by using a disc sander or a bench grinder to get the taper correct and matching the angle to the pins. Maybe use a bit of 'glad wrap' or thin sandwich wrap around the little plug to stop seepage of the glue into the wooden plug, less filing. It will be a challenge to get that taper right in each hole if the glue floods one or more, but not impossible. Or maybe put a thin bamboo stick with plasticine, playdough or some softish mouldable substance around it, and gently push it in the hole, you could pull it out just before the epoxy hardens completely and wipe around the hole with a tiny brush that has acetone on it to smooth it out? It would mean a lot less very fine delicate filing later. Judgment Day will be interesting - and all paths lead there.
| ||
|
MY MARTIN CAME FROM CALIFORNIA EONS AGO AND IS STILL IN PRETTY GOOD CONDITION. I WONDER WHAT IT WOULD BE WORTH NOW?
| ||
|
You could make the wooden plugs by using a disc sander or a bench grinder to get the taper correct and matching the angle to the pins. Maybe use a bit of 'glad wrap' or thin sandwich wrap around the little plug to stop seepage of the glue into the wooden plug, less filing. It will be a challenge to get that taper right in each hole if the glue floods one or more, but not impossible. Or maybe put a thin bamboo stick with plasticine, playdough or some softish mouldable substance around it, and gently push it in the hole, you could pull it out just before the epoxy hardens completely and wipe around the hole with a tiny brush that has acetone on it to smooth it out? It would mean a lot less very fine delicate filing later. I do have a small hand grinder that I could use to shape the plugs to the size of the pins. Haven't used acetone in years, LOL, got a little light headed the last time I used it and it left me with a real bad headache. Thanks again Hermit, you have given me several ideas on how to repair Old Joe.
| ||
|
Hope you can repair Old Joe, if not displaying him on your wall sounds like the next best thing.
| ||
|
Hope you can repair Old Joe, if not displaying him on your wall sounds like the next best thing.
|
×
×